How to make a bong

It is easy to make a disposable bong. Get a 500ml empty drink bottle without a lid. Now cut a piece of garden hose or bendable pipe. Make sure you do not do it to many times though, people may notice.

Get a cigarette lighter and slowly burn a small hole in the side of the bottle about 1/3 of the way up from the bottom of the bottle. Then, when a small hole starts to appear and the rest of the plastic is gooey and hot quickly shove the hose into the small hole. You need to be quick with this step. After you jam the hose into the hole the plastic should mould over the hose and form an air tight seal. Now push the hose through the hole until the hose is about  half an inch or 2cm from the bottom of the bottle.

The last step is optional but recommended. Make another small hole (the shotty), less than the size of your thumb and put it on the other side from the first hole and up higher. This allows you to easily clear the smoke between tokes. Hence you get a clean fresh toke each time. This hole should be about 3 inches or 8cm from the top of the bottle.

If this is done correctly you should be able to construct an air tight bong in a matter of minutes with just a plastic bottle, 6 inch piece of garden hose a lighter and a drop cone.